Introduction
The Lindy HDBaseT Presentation System is a powerful presentation system that allows three source devices to be connected to a remote display at up to 70 metres. This device uses three key components that create smart, autonomous presentation, education or collaboration spaces.
An HDBaseT multi-AV transmitter with support for HDMI, VGA with audio and USB inputs which can be surface mounted. An HDBaseT receiver with dual channel analogue audio extraction, microphone input, RS232 and USB control from an interactive board, designed for discreet installation. Finally, a separate wall mounted room control panel is included to quickly switch between input devices, adjust volumes and power on or off the display.
Both the multi-AV transmitter and control panels are both designed using PoH (power over HDBaseT) which provides power to both units alongside data using a standard Cat.6 network cable. This removes complexity from installations by allowing a single power supply to provide power to the entire system.
Features
- Easily creates smart, autonomous presentation or education spaces
- The system comprises of a control keypad, multi-AV transmitter & HDBaseT receiver
- 70m HDBaseT connection allows for a simple and flexible installation with PoH
- Analogue audio extraction supplies immersive audio to external speakers
Specifications
General:
- AV Interface: HDMI
- Interface Standard: HDMI 2.0
- Supported Bandwidth: 10.2Gbps
- Maximum Distance:
- 70m (229.66ft) - 1920x1080@60Hz
- 40m (131.23ft) - 3840x2160@60Hz
- Maximum Resolution: 3840x2160@30Hz 4:4:4 8bit
- HDCP Support: Pass-through
- EDID Pass Through: Pass-through
- Supported Audio: Pass-through
- CEC Support: Pass-Through
- Serial Interface: -
- Transmission Protocol: HDBaseT
- Transmission Medium: 1 x Cat.5e/6
- Chipset: VS210
Connectors:
- Transmitter Input: 2x HDMI (Female), 1x VGA (Female), 1x USB Type B (Female), 1x 3.5mm Audio (Female)
- Transmitter Output: 1x RJ45 (Female)
- Receiver Input: 1x RJ45 (Female), 1x RS-232 (Terminal Block), 1x Mic In (Terminal Block)
- Receiver Output: 1x HDMI (Female), 1x USB Type A (Female), 1 Relay (Terminal Block), 1x Audio out (Terminal Block), 1x Amplifier output (Terminal Block)
- Power: 5.5/2.1mm DC socket
Physical Properties:
- Transmitter: 115.9mm x 114.3mm x 38.7mm
- Receiver: 250mm x 104mm x 30mm
- Control Plate: 70mm x 32mm x 115mm
- Housing Material: Metal
- Net Weight: 1.227kg (2.71lb)
- Operating Temperature: 0°C - 40°C (32°F - 104°F)
- Storage Temperature: -20°C - 60°C (-4°F - 140°F)
- Humidity: 20-90% RH (non-condensing)
- Power Requirements: 24VDC 3.75A
- Colour: Transmitter: White, Receiver: Black, Control Plate: White
